BCL Research Intern George Marstanovic decided to get wild and use cutout uprights with his corner brackets, which were designed to work with solid uprights only. Armed with a power drill, he worked some magic and made this happen. We dig it! If you do too, you can now order the same setup here.
If you already have a corner-mount BCL wing and are looking to change things up, or if your body just doesn't produce enough testosterone, then we present for your consideration: The BCL DIY Low Mount Cupcake setup. For this procedure, all you're going to need is your trusty power drill. Start by bolting rear holes of the upper bracket directly to the upper/rear hole of the lower bracket - thusly. Then do this when its at the angle you want: Now put a bolt through, and you're done! Good job